Download Skytex Skypad 7 SP729 Firmware Flash File

Are you looking for the stock ROM firmware of your device Skytex Skypad 7 SP729? If yes your answer, you are in the right page. We have given the direct link to download Skytex Skypad 7 SP729 firmware.

Download Skytex Skypad 7 SP729 stock ROM from here, flash it in your device and enjoy the native Android experience again. The download file contains the USB driver, IMEI Tool and the firmware file.

Download Skytex Skypad 7 SP729 Firmware

Download Skytex Skypad 7 SP729 Firmware

Stock ROM File Name: Skytex_Skypad_7_SP729_20131105_PS.zip
Stock ROM File Size: 433 MB
Android OS Version: 2.3


Download Now

How To Flash Stock ROM Firmware In Skytex Skypad 7 SP729

Step 1: To get started, download the firmware file from the link given above. Once done, extract the zip file to get the “firmware.img” of your device.

firmware IMG file

Step 2: Now install Skytex Skypad 7 SP729 USB drivers in your computer.

Step 3: Next, download Phoenix USB Pro tool and install it in your computer. Once installed, launch its Windows.

Phoenix USB Pro

Step 4: Now click on “image” button and load the “firmware.img” file from Step 1.

Load Firmware Image Phoenix USB Pro

Step 5: Once the firmware is loaded, click on “Start” button in the tool. Once you have done that, you will able to see a Green Tick mark in Phoenix USB Pro Window, which means that everything is ready for the firmware flashing process.

Green Tick Phoenix USB Pro

Step 6: Now switch off your Android device and remove its battery (if it is removable). Once done, press and hold the Volume Down key and connect your device to the computer using the original USB data cable. After connecting your device to the computer, keep holding the Volume Down key and press the Power button three times to allow Phoenix USB pro to detect your device.

Step 7: Once your device is successfully detected by the flash tool, firmware flashing process will start automatically and it will get finished in 3-5 minutes.

Step 8: Once the flashing process is finished, you will able to see “Finish” message in Phoenix USB pro flash tool Window.

Finish Message Phoenix USB Pro

That’s it. You have successfully flashed stock ROM firmware on your Skytex Skypad 7 SP729 Android device. Now use the IMEI tool provided in the firmware file and flash original IMEI of your device. Once done, unplug your device from the computer and enjoy the native Android experience again.

If you encounter any issues while following this firmware installation tutorial, do let me know via comments.

The post Skytex Skypad 7 SP729 Firmware appeared first on Stock ROM Files.

Comments

Popular posts from this blog

Samsung Galaxy S9 Plus price free download

Samsung Galaxy A30- free download firmwarespk

Samsung Galaxy S8 Plus firmwarespk